Atlas 2 Post Lift Concrete Requirements

Whether you are an automotive shop or working on personal vehicles from your home, the pv10px is the industry standard! Most of our above ground lift customers install their own car lifts. Web the lift should be located on a relatively level fl oor with 4 in. The bolts are what hold the lift to the concrete. Capacity / adaptable clearfloor / adjustable width.

7 1/2 x 14 1/2 column thickness of steel: Choose from a wide range of baseplate or overhead models. Web 16,000+ lbs car lifts require a minimum of 8thick concrete slab note: Some might recommend a thicker for specified weight. For the auto repair enthusiast at home, you can even place a 2 post car lift in your garage if you have the right space for it.

Web maximum lift height (with adapters) 85 1/2 minimum arm height: 17 1/2 x 20 1/2 motor/electrical requirement: There can be no cracks in the slab within 36 in. Of the base plate location, and no seams in the foundation within 6 in. This concrete floor should have a minimum of six (6) inches of concrete with 3000 psi strength.

7 1/2 x 14 1/2 column thickness of steel: Web the minimum and recommended thicknesses of concrete slab for car lifts. When investigating floor properties, consult building drawings to verify proper floor reinforcement. 220 volt single (1) phase. Choose from a wide range of baseplate or overhead models. Common work such as brake and suspension repairs, tire rotation, and undercarriage work are easily done on a 2 post style lift. All 2‐post lifts require a continuous single slab. Six (6) inches of concrete at 3000 psi is required. We had to upgrade the concrete foundation in the workshop to support an atlas 2 post car lift that we. Web the lift should be located on a relatively level floor with 4 in. Web atlas® brand 2 post car lifts are an industry leader for over 40 years and are known worldwide for providing incredible quality at an unbeatable price. The bottom line is this: Do i need thicker concrete under the posts? Web a core sample should be obtained and tested to verify minimum floor compressive strength. Of the base plate location, and no seams in the foundation within 6 in.

Web For Model 212 Fig.

Web maximum lift height (with adapters) 85 1/2 minimum arm height: Web the lift should be located on a relatively level fl oor with 4 in. If you think your concrete is not suitable. Concrete must have a minimum thickness of 6 inches.

Web The Lift Should Be Located On A Relatively Level Floor With 4 In.

The bolts provided with our above ground lifts will do their job, if your concrete has not been compromised. Some might recommend a thicker for specified weight. We had to upgrade the concrete foundation in the workshop to support an atlas 2 post car lift that we. Common work such as brake and suspension repairs, tire rotation, and undercarriage work are easily done on a 2 post style lift.

Do I Need Thicker Concrete Under The Posts?

Web two post lifts are best for performing mechanical work on a vehicle. Descriptions such as “bulletproof”, built like a brick outhouse, tougher than nails, and other such euphemistic phrases are used every day to describe any of the atlas® pv series models. Capacity / adaptable clearfloor / adjustable width. Failure to do so may result in personal injury;

The Above Recommendations Vary From Brand To Brand.

Concrete must be cured before the installation. This concrete floor should have a minimum of six (6) inches of concrete with 3000 psi strength. Choose from a wide range of baseplate or overhead models. There can be no cracks in the slab within 36 in.

Related Post: